Precisely Synchronized Rectifier Interruption
Small, powerful and easily installed, the Mobiltex uGI1-B enables field technicians to quickly equip rectifiers with interruption capabilities during periodic surveys of cathodic protection systems.
These tough, compact devices are designed to provide precise timing, repeatability and control of rectifier interruption and utilize GPS signals to synchronize operation with all uGI1 units. Event data is recorded by the unit and stored until field technicians download it via USB connection.
The addition of an optional Mobiltex Smart Relay cost-effectively expands the capabilities of the uGI1-B to include continuous logging of load current and interruption faults.
|Accurate and complete reporting||Precise timing and event data logging – includes geolocation, interruption activities, interruption faults (fault and load current logging available with optional smart relay)|
|Intuitive controls and configurations||Easily download data and upgrade firmware via USB connection. The uGI1-S can be easily programmed with our standard Programming Interface and a PC and can also be completed with a compatible iOS or Android-based mobile device and our available Bluetooth Interface.|
|Fast, simple installation||Compact, weather-proof enclosure with magnetic mounting feet can be installed in minutes|
|Built to withstand the toughest conditions||Lightning, surge and overvoltage protection and broad operating temperature range (-22°C to +70°C [ -30°F to +158°F ])|
|Operating Temperature||-20° to +70° C (-4° to +158° F)|
|Storage Temperature||-40° to +85° C (-40° to +185° F)|
|Maximum Altitude||5000 meters above sea level|
|Humidity||0 to 100% RH non-condensing|
|Physical + Power|
|Weight||172g (0.38 lbs)|
|Size||83.5mm x 79.5mm x 45.0mm (3.3″ x 3.12″ x 1.77”)|
|Power||Attach SRL1 AC/DC or SRL2 DC Smart Relay or External Relay Interface cable : 10W watts max — 8-52VDC or 6-36VAC operating voltage range|
Documents & software
|uGI1 Install Pack v220.127.116.11||Configuration Application, Firmware and Drivers v18.104.22.168A||ZIP|
|uGI1 Config Apple iOS App||Download from iTunes||Link|
|uGI1 Config Android App||Download from Play Store||Link|
|CorTalk Full Install Pack v22.214.171.124||Download ZIP file||ZIP|
|LTE Swap Apple iOS App||Download from iTunes||Link|
|LTE Swap Android App||Download from Play Store||Link|
|CorView Apple iOS App||Download from iTunes||Link|
|CorView Android App||Download from Play Store||Link|
Frequently asked questions
This is the GPS synchronized portable interrupter that can be configured locally with a Bluetooth enabled mobile device.
This is the remote GPS synchronized portable interrupter equipped with two-way Iridium satellite communication. The uGI1-S can either be configured locally or sent commands with interruption parameters remotely via CorView.
Press the PROFILE “SEL” button next to the LCD on the underside of the uGI1.
Attach the SRL1 AC/DC Smart Relay, SRL2 DC Smart Relay or the External Relay Interface cable to the uGI1, and connect the two yellow wires to a suitable voltage source. The acceptable input voltage range is 8VDC to 52VDC or 6VAC to 36VAC.