MOBILTEX_Pi-1-Pocket-Interruptor-header

MOBILTEX RELEASES THE CORTALK PI-1 — NEXT GENERATION GPS SYNCHRONIZED POCKET CP INTERRUPTER WITH LONG BATTERY LIFE

Unique AC Peak Detection || Optional Feature

When this unique function is enabled, the CorTalk RMU1 will, while sleeping, sample the coupon current density at set intervals (default 20s) and trigger a unit wake-up and full measurement if the sampled AC current density value is above the associated slot high limit (must be set for operation).

When activated, short AC transients (<30s) can be captured by the RMU1 and exception messages sent to CorView. When the signal again drops below the threshold value, the RMU1 requires a minimum amount of time (default 5 min) of signal below threshold before a clear exception is sent to CorView. Exception messages counts are limited in manner similar to the cap detector function.

This feature requires RMU1 Option 5 to be purchased for operation. The peak detector is inoperable while the RMU1 programming interface is attached. This option is not available with the RMU1S or RMU1_LITE devices. Firmware v1.10 or higher is needed with a G3 or newer RMU1. 

RMU1-SUB-Main-Test-Station-Remote-Monitoring-Cathodic-Protection

CorTalk RMU1-SUB

The Industry's Toughest RMU Takes Safety to the Next Level - Subgrade Test Station Remote Monitoring of CP single or double coupons and structure bond applications. The CorTalk RMU1-SUB reliably transmits in near real-time via cellular or satellite connections. Control, analysis, alarms, reporting, and collaboration tools via CorView Platform.

CorTalk RMU1-SUB
RMU1 Main Test Station

CorTalk RMU1

Test Station Remote Monitoring of CP single or double coupons and structure bond applications. The CorTalk RMU1 reliably transmits in near real-time via cellular or satellite connections. Control, analysis, alarms, reporting, and collaboration tools via CorView Platform.

CorTalk RMU1
Photo of RMU1+INT1 Remote Monitoring Units with the MP Corrosion Winner 2021 Graphic

CorTalk RMU1+INT1

Test Station Remote Monitoring of CP single or double coupons and structure bond applications with permanent GPS-synchronized interruption functionality. The CorTalk RMU1+INT1 reliably transmits in near real-time via cellular or satellite connections. Control, analysis, alarms, reporting, and collaboration tools via CorView Platform.

CorTalk RMU1+INT1

READY TO LEARN MORE?

Call toll free: 1 (844) 689 3282

Our industry-leading Sales, Technical Support, and Service teams are ready to take you from product selection to initial set-up and continue to provide dedicated support throughout the product lifecycle.