MOBILTEX RELEASES GCRTECH PFL1 — PORTABLE PRESSURE/FLOW DATA LOGGER CERTIFIED FOR USE IN NORTH AMERICA AND ENGINEERED FOR EXTREME CONDITIONS

NEW RELEASE! PORTABLE PRESSURE/FLOW DATA LOGGER CERTIFIED FOR USE IN NORTH AMERICA AND ENGINEERED FOR EXTREME CONDITIONS — WATERPROOF AND SUBMERSIBLE WITH LONG-LIFE BATTERY POWER.

The completely updated PFL1 range of data loggers is based on the field-proven design of the PTRI/TRI model and utilize our patented data logging architecture that allows the user to monitor pressure/flow inputs in a multitude of configurations providing ultimate flexibility to meet specific application requirements.

The GCRTech PFL1 stores data in non-volatile memory organized into data files. Each data file is an independent data logger with its own start/stop time, sample rate, and logging rate. More than one data file can record different types of data for the same input channel.

Different types of data include Average, Instantaneous, Minimum, Maximum, etc. The memory register size is designed to be ready to accommodate overflows associated with high pulse rates on Flow inputs.

Pressure measurement accuracy is optimized using multi-point calibration. Logged data can be re-calibrated before, during, or after the recording by recalibrating the pressure transducer to the logger.

Local communications via fast non-contact IrDA communications link (115,200 baud). The logger firmware can also be upgraded in the field via the IrDA communications link.

GCRTECH PFL1 APPLICATIONS:

  • LEAKAGE FLOW-MONITORING
  • FIRE FLOW TESTING / C-FACTOR TESTING
  • PRESSURE/PRV MONITORING
  • HYDRAULIC NETWORK ANALYSIS
  • CRITICAL WATER USER MONITORING
  • PIPELINE CONSTRUCTION PRESSURE LOG
  • PRESSURE SURGE DETECTION
  • MINIMUM NIGHT FLOW ANALYSIS
  • LOW-PRESSURE INVESTIGATIONS

FEATURES OF GCRTECH PFL1

One to three selectable channels (2 Flow/1 Pressure) Internal & external pressure sensor configs available.

• 2 MB Flash non-volatile memory organized into 6 separate data files – 60000 reading each and 2 separate data files – 250000 readings each
• Data is retained for 10 years if battery power fails
Configurable Sampling Rate: 1 second to 15 minutes
Configurable Logging Rate: 5 seconds to 24 hours
Logged data types: Average, Instantaneous, Minimum, Maximum
Flow Logging Modes: Pulse, Event, Pulse Interval Timing
Communications: IrDA – Baud Rate of 115,200 Baud
Completely waterproof and submersible (IP68)
Battery life > 5 years under normal operation
Includes GCRLog Lite PC software for programming, downloading & graphing

Specifications

DATA | LOGGING:

Memory:

2 MB Flash non-volatile memory organized into 6 separate data files – 60000 reading each and 2 separate data files – 250000 readings each

Sampling Rate:

Configurable Sampling Rate: 1 sec – 15 min

Logging Rate:

Configurable Logging Rate: 5 sec – 24 hrs

ANALOG & DIGITAL INPUTS:

Pressure transducers:

20 Bar / 290 psi Range Standard

Pulse Rate:

Std. 80/second – Max 400/second optional

Flow Meter Sensors:

Compatible with all major meter manufacturers that are equipped with a digital pulse output.

Documents & software

NameDescriptionType
MOBILTEX GCRTech PFL1Product BrochurePDF
NameDescriptionType
MOBILTEX GCRTech Manual – please CONTACT USPTRI / TRI ManualPDF
NameDescriptionType
MOBILTEX GCRLog Software – please CONTACT USData logger software [programming, downloading & graphing]Zip File

READY TO LEARN MORE?

Call toll free: 1 844 689 3282 [NA]
1794 340515 [UK]

Our industry-leading Sales, Technical Support, and Service teams are ready to take you from product selection to initial set-up and continue to provide dedicated support throughout the product lifecycle.

WP-thumb-Cathodic-protection-Buried-Pump-Stations

Cathodic Protection Remote Monitoring On Water Utility Buried Steel Pump Stations

Forward-thinking municipal water and sewer utilities are adopting advanced monitoring technologies to extend asset operational life, improve safety, and lower costs.