MOBILTEX RELEASES GCRTECH PFL1 — PORTABLE PRESSURE/FLOW DATA LOGGER CERTIFIED FOR USE IN NORTH AMERICA AND ENGINEERED FOR EXTREME CONDITIONS

Flexible and cost-effective data logger with customizable display — waterproof and submersible with long-life battery power.

The TRID range of data loggers use a new data logging architecture that allows the user to monitor pressure/flow inputs in a multitude of configurations providing ultimate flexibility to meet specific application requirements.

The GCRTech TRID stores data in non-volatile memory organized into data files. Each data file is an independent data logger with its own start/stop time, sample rate, and logging rate. More than one data file can record different types of data for the same input channel. Different types of data include Average, Instantaneous, Minimum, Maximum, etc. The memory register size is designed to be ready to accommodate overflows associated with high pulse rates on Flow inputs.

Pressure measurement accuracy is optimized using multi-point calibration. Logged data can be re-calibrated before, during or after the recording by recalibrating the pressure transducer to the logger.

Local communications are via a fast non-contact IrDA communications link (115,200 baud). The logger firmware can also be upgraded in the field via the IrDA communications link.

GCRTECH TRID APPLICATIONS:

  • LEAKAGE FLOW-MONITORING
  • PRESSURE ZONE / DMA BOUNDARY VALVE MONITORING
  • PRESSURE/PRV MONITORING
  • HYDRAULIC NETWORK ANALYSIS
  • PRESSURE SURGE DETECTION
  • CUSTOMER PRESSURE COMPLAINT INVESTIGATIONS
  • RAINFALL MONITORING
  • PUMP ON/OFF TIMES
  • MINIMUM NIGHT FLOW ANALYSIS

FEATURES OF GCRTECH TRID

One, two, three and four channel models with up to two pressure sensors

• 2 MB Flash non-volatile memory organized into 6 separate data files – 60000 reading each and 2 separate data files – 250000 readings each
• Data is retained for 10 years if battery power fails
Sampling Rate: Configurable 1 second to 15 minutes
Logging Rate: Configurable 5 seconds to 24 hours
Logged data types: Average, Instantaneous, Minimum, Maximum
Flow Logging Modes: Count, Event, Pulse Interval Timing
Communications: IrDA – Baud Rate of 115,200 Baud
Completely waterproof and submersible (IP68)
Stainless steel, fully potted case – unmatched durability
• Battery life > 5 years under normal operation

Specifications

ANALOG & DIGITAL INPUTS:

Pressure transducers:

20 Bar Standard

Current inputs:

0-10 mA, 4-20mA

Voltage Inputs:

0-1, 0-10V

Pulse Rate:

Std. 80/second – Max 400/second optional

ANALOG & DIGITAL INPUTS:

Flow Meter Sensors:

Elster: MSM, HRP, BPG20

Actaris: LF

Sensus: RD01, OPTO 06, OD 07

Quadrina: MPT, MEP, QEP

Documents & software

NameDescriptionType
MOBILTEX GCRTech TRID BrochureProduct BrochurePDF
NameDescriptionType
MOBILTEX GCRTech Manual – please CONTACT USTRID ManualPDF
NameDescriptionType
MOBILTEX GCRLog Software – please CONTACT USData logger software [programming, downloading & graphing]Zip File

READY TO LEARN MORE?

Call toll free: 1 844 689 3282 [NA]
1794 340515 [UK]

Our industry-leading Sales, Technical Support, and Service teams are ready to take you from product selection to initial set-up and continue to provide dedicated support throughout the product lifecycle.

Mobiltex-whitepaper-lightning-immunity-image

Defending Against the Destructive Potential of Lightning Strikes on Pipelines

Can lightning strikes cause corrosion in underground oil and gas pipelines? Yes and no! Learn more about the many powerful impacts to your pipeline assets including the monitoring of your corrosion and integrity protection systems and how to effectively and proactively protect your operations.

Solution: GCRTech TRID
Plan Frequency + Tiers + Options
Cellular
Iridium Satellite
Globalstar Satellite
(One-way)
Plan
Readings every 7 days — Transmitted every 7 days
Readings every 7 days — Transmitted every 28 days
Readings every 2 days — Transmitted every 2 days
Readings every 2 days — Transmitted every 8 days
Readings every 1 day — Transmitted every 1 day
Readings every 1 day — Transmitted every 4 days
Readings every 6 hours — Transmitted every 6 hours
Readings every 6 hours — Transmitted every 1 day
Readings every 1 hour — Transmitted every 1 hour
Readings every 1 hour — Transmitted every 12 hours
Readings every 30 days — Transmitted every 30 days
Readings every 14 days — Transmitted every 14 days
Options
Cover Removal / Door Switch Exception Reporting
Remote Limits
External Contact Alarm Exception Reporting
AC Peak Detection
TS1 Temperature Sensor
Fast Sampling - every 10 sec, 1 sec, or 0.1 sec